C
A C D E G H I L M N O P R T V W Y
- Can I connect more than one USB-COM to my computer?
Yes.--You may operate as many serial ports as your operating system supports. In Windows 98/ME this is 128, in Windows 2000/XP it is 256. The limit in ... - Can I use the USB-COM in other operating systems than Windows?
This depends on the operating system. It is possible to use the USB-COM in Linux since kernel 2.4.x. The drivers are provided by the manufacturer of the ... - Can I use the serial cards under Linux?
The driver 'serial' supplied with Linux already supports the VScom PCI cards. For installation caveats please read further. In Linux systems based on Kernel 2.4 ... - Can I use a ZIP-drive on the LPT-port?
ZIP-Drives can operate at the parallel ports. If the port shall be uninstalled, it is necessary to uninstall the drive first. Otherwise Windows 2000 does not boot any more. ... - Can I use CANopen with the VScom CAN Adapters?
Yes, you can. Our devices are supported by CanFestival Project (http://www.canfestival.org ). CanFestival is an open source CANopen framework. Please refer to VSCAN Manual for details. ... - Can I change the name of the serial/parallel port?
In Device Manager select the "Multiport Serial Adapters", even when it is for a parallel port. In that section you'll find an entry for your ... - Can I check at which COM ports my CAN devices are?
You can run our tool "vs_can_search" which you find here . It is also possible to get extra debug informations with the parameter "-d[1-3]" - ... - Can I use WLAN card with some other chipset rather than rt2561?
You can use other MiniPCI/USB WLAN cards provided you find the appropriate driver. Please note that for some WLAN cards the driver is not enough, ... - Can I put 15 server NetCom 113 in the same pc?
The driver for NetCom Virtual Com Ports do not put a limit to the number of NetCom servers or serial ports installed this way. The only ... - Can I use NetCom Serial Ports from many PCs at the same time?
This question applies to the driver mode of NetCom, which implements Virtual Com Ports in a Windows system. The driver implements the same limit as ... - Can I use the function XXXXX on the USB-COM?
The supplied driver installs a Com Port in Windows for each serial interface on the USB-COM product. Since this port is a Com Port, of couse ... - Can I use the function XXXXX on the NetCom Ports?
The supplied driver installs a Com Port in Windows for each serial interface on the NetCom Serial Device Server. Since this port is a Com Port, ... - Can I use the function XXXXX on the PCI and PCIex cards?
The supplied driver installs a Com Port in Windows for each serial interface on the VScom PCI or PCIex card. Since this port is a Com ... - Can I use SocketCAN with VSCAN devices?
Yes, it is possible. As of Linux kernel 2.6.38 ASCII protocol (slcan) will be also supported. To use it you’ll first need to install can-utils ... - Connectors: Manufacturers and Part Numbers
Sometimes external pluggable connectors and adapters get lost. Here is information on Manufacturers and Part Numbers, to find a suitable supply shop. 1. Power supply 3-pin ... - CAN support in Linux
EmRunner's CAN registers are accessed in two step: 1. put register address on the wire 2. put/read data to/from register That is the reason, why standard LinCan ... - Can I use NetCom 123 WLAN with my Smartphone App?
This question is very often targeted to navigation / map display applications, especially those installed on iPhone/iPad or Android systems. Of course the answer depends ... - Can NET-CAN convert high-layer CAN bus protocols to Ethernet
The NET-CAN (and the other VSCAN devices) are CAN bus adapters, giving application software access to a CAN bus. As such they implement the CAN ...