Open questions RSS

Here you can see questions asked by other users. If you answer these question, your answers may be inserted into the FAQ.

Date / User Question  
2015-10-01 08:23
Reijo Pitkänen
PCI/ISA/PCMCIA to Serial:
Vscom PCI-200L/UPCI card causes DRIVER_IRQL_NOT_LESS_OR_EQUAL error and blue screen on windows 7 pro both 64 bit and 32 bit version. Occurs quit seldom, about once a week but sometimes can happen several times in a day. Driver version is the newest, vss2k.sys version 3.03.00.015. We have delivered over 10 similar installations in Dell Optiplex XE2 pentium i3 and i5 PCs to our customers, but only some (3) of those installation have reported hang problems caused by vss2k.sys. I have now an identical test system running on my desk and it has crashed three times in one months test period. Is there coming any updates to the driver, or do I have to chance the serial cards to some other label?
Answer
2015-11-10 13:54
Goldenstein
Network to Serial:
Der Netcom Manger kann den Com-Server nicht finden. Auch ein Reset auf Factory Settings bringt keinen Erfolg.
Answer
2015-11-16 20:02
Sebastian Friederichs
Network to Serial:
I've just installed the NetCom 111 interface on our new server for making the connection between our hotel-software and the pbx. The port is recognized in Windows 2008 R2 Server and the settings (9600,8,n,1) had been done in the windows-driver, in the client-software which connects to the pbx and in the netcom application. The software sends commands to the pbx through the serial port and receives acknowledgements and billing data. Unfornately, the software says "pbx does not answer". The detailed protocol says: "Unknown packet type received over serial device 1. 00 00 00 00 00 30 44 30 | NUL NUL NUL NUL NUL 03 | ETX" after sending a command and waiting for the response. When i decrease the baudrate, the "NUL"s become less. When baudrate is increased, they become more. On the webserver/statistics i can see that RX and TX values are increasing, so it seems that the command is sent correctly to the pbx, it answers but the answer is not delivered correctly to the client. As my serial-port-know-how is not far more than customer-grade, i hope you can help me solving the problem. Thanks a lot in advance, Sebastian Friederichs
Answer
2015-11-29 04:45
ron@rgb52.com
Network to Serial:
can I configure as a splitter - I need 3 ports same com
Answer
2015-11-30 14:02
Dino Durakovic
PCI/ISA/PCMCIA to Serial:
Hello, I have bought an pci-100l. In the properties i cant seem to find where I can change the COM port number. Please help. Thank you
Answer
2015-12-18 10:30
Slm
USB to Serial:
I'm using VScom USB-8COM-PRO. 28800 baud rate is not standard, so how can I set baud rate 28800?
Answer
2015-12-25 08:59
Dieter Bitz
Network to Serial:
Do you have a STP-Datai from Baltos iR 3220? Best regards Dieter Bitz
Answer
2016-01-06 16:50
Dave
Network to Serial:
PCI 2 serial card. Followed instructions on your site. Device manager sees PCI card, but cannot find driver. I tried downloading driver from you site, but still no luck. Running Win 7. This device was working for me for years, until I had to do a system upgrade and re-installed Win 7 upgrade. System sees USB ports, but not PCI ports. Please advize.
Answer
2016-01-20 08:57
DRhys
CAN Adapters:
Is it possible to detect when the CAN adapter has been disconnected from the COM port/device?
Answer
2016-01-29 17:58
Ricardo Tejero
Network to USB Servers:
Any drivers for NET USB-400i in order to use it on PCs with windows 10?
Answer
2016-02-18 12:47
.Marc
Industrial PC:
Hello, Time ago I bought a Baltos IR5221 ViaVpn Pro. This can be connected via vpn throght www1.viavpn.com, but this website is no longer exists. Anyone who has the same problem? or anyone has an idea to resolve the problem? Many thanks
Answer
2016-02-24 09:30
LETELLIER JEAN-MICHEL
OnRISC:
Hie! I'm a french teacher. I use Onrisc since several years. Last year, I could install libmysqlclient-dev without troubles. Now with the same OS , I can't update, upgrade, and install libmysqlclient-dev ...There is a problem of path, or file..Help!!! Path in sources.list are correct but a file is not present: "zlib1g-dev armel 1:1.2.3.4.dfsg-3". Network is ok. I can't do my tests with students any more. Thank You
Answer
2016-03-03 11:19
sebastie loisel
CAN Adapters:
Hello, I used a NetCAN Plus to communicate with CAN module over Ethernet. I try to send CAN frame over Ethernet to NetCAN+ and receive CAN frames using CAN Peak (USB module connected to my pc) /***********************************/ /* NetCAN+ Configuration */ /***********************************/ NetCAN+ is configured in TCP Raw Server, TCP port(Data) : 2001 and MaxClients : 1 NetCAN+ @ip is 192.168.0.10 /***********************************/ /* First Test Configuration */ /***********************************/ ------------------ slCAN0 123 [2] 11 22 ----------------- |slCAN0(ethernet)|--------------------------------------------->|ethernet | | | | | | PC | | NetCAN+ | | 192.168.0.2 | | 192.168.0.10 | | | ---------- | | |CAN0(usb) | 47904 [PSH, ACK] Seq=1 Ack=11 Win=905 Len=2 TSval=130002 TSecr=20655358 3 0.005006000 192.168.0.2 192.168.0.10 TCP 66 47904 > dc [ACK] Seq=11 Ack=3 Win=229 Len=0 TSval=20655360 TSecr=130002 But for CAN0 side (PC), I see no packets with CANdump CAN0 I have no packet received (using CANdump and my code). (For information : my code is functional when I use CAN peak to communicate directly with a motor communicating on CAN bus) /***********************************/ /* Second Test Configuration */ /***********************************/ ------------------ ----------------- |slCAN0(ethernet)||CAN | ------------------ ---------- ----------------- can0 601 [8] 2B 0C 10 00 00 00 00 00 can0 602 [8] 2B 0C 10 00 00 00 00 00 can0 603 [8] 2B 0C 10 00 00 00 00 00 can0 604 [8] 2B 0C 10 00 00 00 00 00 can0 000 [2] 80 00 can0 701 [0] remote request can0 702 [0] remote request can0 703 [0] remote request can0 704 [0] remote request can0 601 [8] 2B 0C 10 00 00 00 00 00 can0 602 [8] 2B 0C 10 00 00 00 00 00 can0 603 [8] 2B 0C 10 00 00 00 00 00 I send CAN frames to NetCan+ module and expect to receive frames on ethernet side. When I send CAN frames on CAN0 with CAN Peak, I sniff no ethernet packets on PC using Wireshak. What's going wrong ? from my point of view, NetCan+ is well configured and my test configuration seems to be valid ?!! Is TCP Raw Server the good choice for our needs ? Thanks for your support, S. Loisel sebastien.loisel@robosoft.com Tel:+33.6.27.76.51.33
Answer
2016-03-21 16:23
chen
USB to Serial:
I got a VScom USB-COM-I SI to communicate one Sonar. But the sonar software can never receive the data from the adapter. How can I confirm if this adapter really work or not? How could I tune if it is hardware issue or software issue?
Answer
2016-03-22 14:09
Shamanth
Miscellaneous:
Hi, We are contacting you on behalf of our mutual customer Mettler-Toledo. To ensure compliance with SEC regulations and the Dodd-Frank Act, Mettler has engaged IHS Inc., a worldwide leader in technical content services, to assist us in collecting conflict mineral information from each manufacturer in their supply chain, who in turn, must solicit that information from the next tier of suppliers. If you are the correct contact please respond to this email and I will forward you the full survey. If you are not the correct contact might you point me to, or in the direction of, the correct contact for this . In case if you have any questions please feel free to contact me. Have a good day!!! Best Regards, Shamanth M Sourcing Engineer 15 Inverness Way East | Englewood, Colorado | 80112 Phone: +1 303 357 8092 shamanth.manjunath@ihs.com This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. Thank you.  Please consider the environment before printing this e-mail
Answer
2016-04-07 12:01
marc
OnRISC:
Hello, Is it possible do a reset to the Baltos iR5221 viaVpn Pro to restart factory settings? Thanks
Answer
2016-04-14 13:53
Arthur Strachan
Miscellaneous:
I am looking for drivers for Dual Serial Card DS200. The card is ~12-15 yrs old. Can you help? Regards Arthur Strachan
Answer
2016-04-22 02:31
Gennady Shelomanov
Network to Serial:
Hello, can you help me with step-by-step setup instruction of the netcom 123 wlan device? I can't IP connect in my laptop with Win7-64 OS. Thanks.
Answer
2016-04-27 15:25
Ralph Groves
VScom Serial Device Servers:
We have a NetCan Plus 110, and wish to change the default IP address of 192.168.254.254. How do we do this?
Answer
2016-05-05 15:49
Matt Synborski
Network to Serial:
Hello. Does your company have a CAGE code?
Answer
2016-06-10 18:19
Huckleberry Finn
CAN Adapters:
How to configure VCP baudrate aliasing on Ubuntu Linux? VSCOM USB-CAN adapter works on 3Mbps speed. But my GUI program allows only standart COM-port speed till to 1 Mbps. So, when I choose, for example, 56700 bps it doesn't work because VSCOM USB-CAN adapter works on 3 Mbps. In Windows OS we just have to change FT232 chip config file FTDIPORT.INF (make baudrate aliasing). But my OS is Linux. Where can I tune FT232 chip and make baudrate aliasing?
Answer
2016-06-16 14:34
Vladislav
CAN Adapters:
My USB-CAN Adapter works properly on 20 kbps or lower, but cannot use baudrates above 20 kbps. When I set higher baudrate (function VSCAN_Ioctl() in vs_can_api.dll), my oscilloscope shows periodic pulses on CAN_H output and the device indicates error (red LED). What's the problem and how can I solve it?
Answer
2016-07-07 04:34
YVES GUITTON
VScom Serial Device Servers:
how get windows 10 driver for netcom 123 wlan ?
Answer
2016-07-14 11:42
ahme soliman
VScom Serial Device Servers:
how can i check net com 413 working or not ? as i have communication problem and 413 leds all off except power led
Answer
2016-07-25 06:19
Eliot Blennerhassett
USB to Serial:
My system includes two USBCom Plus 8-port. I have two such systems, so 4 boxes total. This questions is about the FTDI serial numbers associated with the 8 external ports (not the internal config port). Each usbcom+ contains two ftdi devices, each providing four ports. On three of the four usbcom+, the two FTDI devices providing four ports have the same serial number e.g. FT97WK0I (allowing them to be identified as ports of the same box), while on the fourth usbcom+, the two FTDI devices have *different* serial numbers. Eg.FT9G7W8A and FT9G7W8B Is either of these scenarios "normal", or is it random whether the serial numbers will be the same? ======================================== Feature request: Ability to read a unique ID from the config serial port. It might be the FTDI serial number of the config port chip, or the actual serial number from the barcode on the box, or a user-set string. ============================================ I can offer you some udev rules for linux that allow stable names to be assigned to the ports of USBCom+ . If you are interested, contact me by email, as this web text box is too small to go into details.
Answer
2016-08-26 02:59
Seongkeun Lee
CAN Adapters:
Hi. I'm Seongkuen Lee in LG Chem. I'm s/w programmer and I was programming related to masking with CAN. Codes are like this. VSCAN_CODE_MASK mask = new VSCAN_CODE_MASK(); mask.Code = 0x7BB; mask.Mask = 0x7FF; vscan.SetACCCodeMask(mask); Languate: C#, OS: Windows 7 Professtional .NET Framework: 4.0 Visual Studio: 10 Professtional VS CAN device has been no problem before inserting masking code. But now, Tx is OK, but Rx is disbled(Can't read any Rx can frame perfetually) I tried the same masking code with new device. This give me same result. Can you have some advice to me? Thanks in advance.
Answer
2016-09-26 16:01
Steve Levitt
CAN Adapters:
Why cannot vs_can_search find my can adaptor? : vs_can_search v1.2 (debug output: -d[1-3]) ********************************************* * Ensure, that the COM ports are not in use * ********************************************* DLL version: 1.7.0 +++ sysfuncs.cpp[470]: --> EnumDevices2List +++ sysfuncs.cpp[522]: serial port COM4 found +++ sysfuncs.cpp[625]: GetDeviceType +++ sysfuncs.cpp[704]: device type USB-CAN +++ sysfuncs_lawicel.cpp[208]: ResetDevice_Lawicel +++ sysfuncs_lawicel.cpp[39]: GetDeviceSerialNrNVersion_Lawicel +++ sysfuncs.cpp[540]: not a VSCAN device at COM4 *** sysfuncs.cpp[485]: no (next) item found +++ sysfuncs.cpp[564]:
Answer
2016-10-04 07:45
Lamoureux Michel
VScom Serial Device Servers:
hello, we're using three 111 units since 2011. they are of software version 2.6.1 is a newer version supporting IEEE 802.1x available for these modules ? regards
Answer
2016-10-14 08:01
Stev Mattig
Miscellaneous:
Ich benötige Treiber für das Modul Sierra Wireless MC8790.
Answer
2016-10-17 13:22
Alexander Steppke
USB to Serial:
Could you please let me know how the isolation is implemented in the VScom USB-COM SI-M? I want to connect two devices on different ground potential. Are all parts of the RS232 connector isolated against USB? Thank you and best regards.
Answer
2016-10-18 15:01
Jiri Eichler
Network to Serial:
We have more Netcom adapters (Network to Serial) - software version 2.6.3. In web-interface settings, we have to add Gateway to column named "Broadcast". When we add gateway to column named "Gateway", it not works. Is that possible, that there is some naming mistake in webpage interface on Netcom adapters? Thanks for info.
Answer
2016-11-16 22:38
Norbert Volkert
Network to Serial:
After the installation of the Netcom driver the Com port appears but it is not not even possible to connect with a terminal program like termite to that port. I use windows 7 SP1.
Answer
2016-11-18 22:07
Jeffrey
CAN Adapters:
On Linux using the vscan api (not ascii), if I have one VSCAN_HANDLE variable shared among 2 threads, is it a) thread-safe for one thread to block in a read while the other thread writes? b) if so, then will the write be delayed by the blocking read? c) if not, then would you suggest a method? Thanks!
Answer
2016-11-25 13:29
Joachim Weiss
Network to Serial:
Sehr geehrte Damen und Herren, wir haben zwei NetCom113 (lite) im Einsatz. Wir möchten jetzt weitere Geräte im gleichen Netz (die COM Ports sollen am selben PC erscheinen) zufügen. Macht es ein Problem wenn wir die 113+ Modelle verwenden oder ist es der gleiche Treiber? Sind die lite Modelle noch beschaffbar? Mit freundlichen grüßen Joachim Weiß
Answer
2017-03-04 21:26
Steve
CAN Adapters:
How to detect CAN errors? Using "vs_can_api_wrapper.cs" to read messages in a c# CAN-monitoring application. I set the read mode to be non-blocking, and also set up an event to be called when a message arrives "SetRcvEvent". Sometimes, the read returns no messages, so I then call "GetFlags", which returns the flags as zero. I assume this means no error. Unfortunately, calling "GetFlags" destroys the timing of the messages. If I use blocking reads, the read does not return when there are CAN errors, so I cannot get the reason for the error. So how can I detect CAN errors whilst keeping the timing intact?
Answer
2017-03-29 12:59
Andrea Giachero
CAN Adapters:
I'm going to use a CAN Adapters from VSCom inside a control framework written in python on Linux. So, I ask you if it exists any module in python to control your device. Best, ag.
Answer
2017-03-29 13:00
Andrea Giachero
CAN Adapters:
I'm going to use a CAN Adapters from VSCom inside a control framework written in python on Linux. So, I ask you if it exists any module in python to control your device. Best, ag.
Answer
2017-04-01 09:14
Catherine
Network to Serial:
I need confirm one questin with you guys first. I need software flow control and I find that the NetCom 123 WLAN can meet it,Could you tell me how the Xon/Xoff work? The control chatacor is control-s/control-off or 0x11/0x13?
Answer
2017-06-09 15:30
Martin Åkerlund
Network to Serial:
Are the drivers for "Netcom 811" (8 port network port) compatible with windows server 2016?
Answer
2017-06-12 04:18
Jason Bauer
Network to Serial:
We are using the Netcom 411 on version 2.4 and have updated operating software to windows 10. Is it possible to update firmare to the current 3.4 version intended for the Netcom+411? Jason Bauer HOD Audio –Mindfreak LIVE! (702) 439-3778 Jbvam1@gmail.com
Answer
2017-06-28 15:12
Wictor pansar
Network to Serial:
Hi I recently bought two netcom+ 811 DIO. When i opened the package there was no cd included. Whrer can i find NetCom Manager? On youre webbsite i can only find the manuale and drivers. // Wictor
Answer
2017-07-20 13:02
Joachim Weiss
Network to Serial:
Hallo, welche Version des Netcom Managers ist geeignet um NetCom113 und NetCom113+ gemeinsam zu betreiben. Mit freundlichen grüßen Joachim Weiß
Answer
2017-08-03 18:07
Fred Edqvist
Network to Serial:
I have lots off old netcom 123 WLAN can I use the new firmware(3..) to upgrade?
Answer
2017-08-04 18:07
Jeffrey Graham
CAN Adapters:
I need VSCAN_open (1.8.0 linux api) to accept a timeout arg and do something reasonable if the timeout expires. Currently VSCAN_open just hangs forever if the device is not powered on.
Answer
2017-09-15 14:00
Christina
Network to Serial:
I would like to know what is the suggested configuration for the serial configuration tranfer mode in the case described below. We have two NetCom plus 111 connected to the same LAN through their ethernet interfaces. I have connected a pc to the serial port of first Netcom and a modem to the serial port of the second Netcom. I have tried "Null modem tunnel" configuration on both sides with no success.Could you please provide us a relevant configuration example? Thank you
Answer
2017-10-20 00:24
Daniel Glasser
USB to Serial:
I have a USB-COMi-M adapter that I've been using for at least 6 years, most recently under Windows 7, and my employer "refreshed" my workstation. I have been unable to locate the installation files for the driver, and the VScom website has me fill in contact information, puts up a box saying that I should choose the download I need without giving me anything to choose from, and I end up going back to the same set of pages and questions. I've been through it a few times, but am unable to locate any link to actually download the driver.
Answer
2017-11-01 12:54
Aditya Purohit
Miscellaneous:
I want to access u-boot command line interface with baltos ir-2110. What is the procedure for the same.
Answer
2017-11-06 08:07
Aditya Purohit
Embedded RISC:
I am working on baltos ir 2110, I am using self compiled u-boot using am335x_baltos_defconfig in u-boot configuration files. Problem is that with this configuration, the 'saveenv' command on u-boot is not enabled. I want to use this command to change some of the environment variables and set values to some in runtime. I have created a test setup on beaglebone using saveenv and now I am replicating it on baltos. Is the saveenv command deliberately switched off by the configuration of baltos? How can I turn on saveenv and what other configurations do I need to save and edit u-boot environment in runtime?
Answer
2017-11-30 15:24
Ralph Kruse
Network to Serial:
Would you please send me a ROHS certificate for the NETCOM 111? Thank you.
Answer
2017-12-20 14:24
Fatih SEVER
USB to Serial:
From our understanding USB-4COM-PRO device used 96Mhz clock, and calculates corresponding baudrate by dividing this frequency. We have observed from the previous question, you have defined the divisor integer range to be higher than 16. The device supports 12Mbit baudrate, so why did not you define the range of divisor to be above 8. We want to use the device with around 10Mbit baudrate, if you can divide 96Mhz with 9, in which the error will be less than %1.6, it would be fine for 10Mbit baudrate.
Answer
2018-02-27 13:47
Sami Koskelo
USB to Serial:
Hi, We are using VSCom USB-2COM Plus ISO in our production and we are now facing a problem when device ports are assigned in Centos7.1 Linux. Sometimes the port0 is assigned to /dev/ttyUSB0 and othertimes to /dev/ttyUSB1, port1 assignment goes vice versa. Is there something wrong with the product? How can we force the port0 to always be assigned to /dev/ttyUSB0? Thanks, Sami Koskelo
Answer
2018-04-02 10:27
Bertrand Luzarche
CAN Adapters:
Hi, What comes back in ASCII mode when a standard request is emitted on the bus ? If I send "r0068" for instance (function 6 returning 2 floats, so 8 bytes). What will be sent back in the ASCII connection after z[13] (or Z[13] ?) ? How can you sell a product for so long without even indicating such a basic information in any source (FAQ, documentation) ? Is it binary ? ASCII ? Any example ? Regards.
Answer
2018-04-09 22:01
Jeffrey Graham
CAN Adapters:
1) Example in Linux using VSCAN_SetRcvEvent? I'd like to see a while-loop that uses setRcvEvent in C++ to read canbus messages. I have three of your NetCAN Plus 110s. 2) Can I create a single application that reads and writes to 3 different NetCAN Plus 110s if they are all configured with different IP addresses and/or ports? Has this been tested? Thanks!
Answer
2018-05-03 18:21
Zac Schramm
Network to USB Servers:
I tried to follow guidance about using socat to connect the NETUSB-400i in Linux, however it doesn't seem like there is enough information. I did a nmap scan and found port 80 (web interface) and also port 515 open. Assuming 515 is to connect to the usb ports, however would have thought one IP port per usb port. Can you provide any further guidance on this, it would be very much appreciated. I am trying to use this to passthrough USB devices to my Linux virtual machines
Answer
2018-05-22 15:35
Koray Necip AYTAÇ
PCI/ISA/PCMCIA to Serial:
I have VScom 200Ei-SI PCIex and could not Enable TCR. When I check box of enable TCR when 19550 is selected it disappears default by next time openning the menu.Because of I could not activate TCR, I can not achieve the high bit rates
Answer
2018-05-29 19:02
Jim Nader
USB to Serial:
Can I control the modes of the USB2-8COM PRO with LabVIEW? I am able to send & receive data but I get an error when trying to change modes (422-485-232). Thanks. Jim
Answer
2018-06-26 15:08
Eric Stempels
USB to Serial:
In 2003 we purchased a VSCom 800L unit, where the 8 serial ports are made available through a separate (wall-mounted) box. This is a PCI-U based card with a single and very wide connector to the box. We now would like to upgrade our system, to a machine with PCI-express and Windows 10. Will we be able to use the VScom 800E PCIex with the same wall-mounted box? Will the card be supported under Windows 10? Thanks for your feedback.
Answer
2018-07-11 12:53
Alan MacArthur
Miscellaneous:
Please can you supply me a copy of the CE certificate of conformity for the Baltos iR3220. This is for reference and our Technical Construction File (TCF) Kind Regards Alan MacArthur
Answer
2018-07-16 16:22
Nelo
CAN Adapters:
Hello, I've been working with several netCAN Plus 110 devices and they work really nice. I have a question related to disconnections of these devices. I'm using the C# wrapper for .NET and I would like to know if the device is disconnected, when this happens the write function keeps working and no exception nor signal is thrown to the upper layers. Is there a way to know if the netCAN is disconnected apart from using a keepalive?
Answer
2018-07-19 14:54
hercouet
VScom Serial Device Servers:
Hello, I’m writing to let you know that the product "VScom USB-4COM-PRO" is still available ? Best regards
Answer
2018-07-24 17:48
Jeffrey Wright
USB to Serial:
USB-CAN Plus will not display/process incoming frames, and so trigger mode Tx frames will not work. It works on XP, but not on Windows 10 Pro. Is this a known issue, or am I missing an updated driver? (have 2.00.01)
Answer
2018-08-08 16:36
Axel Bethke
VScom Serial Device Servers:
NetCom Plus 111 Software Version 3.4.6 Hardware Version 4.2 KeepAlive=On KeepAliveInterval=60 Mode=TCPRawServer Max.Clients=1 Why reconnect to TCPRawServer is possible only first two times after KeepAliveInterval of 60 seconds? NetCom restarted client connected with NetCom connection broken reconnect after 60 seconds connection broken reconnect after 60 seconds connection broken reconnect after 15 minutes connection broken reconnect after 15 minutes NetCom restarted client connected with NetCom connection broken reconnect after 60 seconds
Answer
2018-08-09 11:40
Vladimir Butorin
CAN Adapters:
Could you please provide API for linux AARH64 and raspberry PI platforms? I can also build it self if you can provide me a source code. Thank you, Vladimir Butorin
Answer
2018-08-30 06:52
junjun
Miscellaneous:
hi I want to ask i have vscom netcom811pro how to reset into factory setting? and how to access the webpage of netcom 811pro? what is the default IP address. I read the menu and didn't state inside.pls advice
Answer
2018-09-18 22:02
daniel
Network to Serial:
hello ! i have an Vscom LPT Parport (LPT3) and i want to find out the I/O Range.
Answer
2018-10-16 17:03
Jim Jollota
USB to Serial:
I have been using these devices successfully for years, but now I need to use a different laptop. The device is recognized, but Tera Term reports garbage data. I know the serial stream is correct, but it seems to be specific to this laptop, or windows (7), or the device. Have you run across this before?
Answer
2018-10-18 15:09
Vladimir Butorin
CAN Adapters:
Hi, I am trying to set up filtering feature on NetCan 120 adapter over VSCAN_API_1_8_0, but seems that my call of VSCAN_Ioctl with VSCAN_IOCTL_SET_FILTER is ignored. Could you please share with me a working example? Thank you, Vladimir
Answer
2018-12-01 04:43
rcnspecials
:
tan tory burch riding boots nike air max 1 premium womens white blue mackage jacket aritzia michael kors tote bag raspberry health moncler jacket byron ontario ray ban wayfarer medium size rcnspecials [url=http://www.rcnspecials.com/]rcnspecials[/url]
Answer
2018-12-13 13:46
Martin Souce
VScom Serial Device Servers:
Hi. We got multiple PC with an application that is only using COM1 (we can't configure COM2, 3, etc on this app). So each PC needs only one COM port. Is it possible to "link or rename" to COM1 each serial port of the NetCom (813) in the windows drivers ? So it will be : PC A Driver : COM1-----Serial port 1 NetCom PC B Driver : COM1-----Serial port 2 Netcom PC C Driver : COM1-----Serial port 8 NetCom ... Thanks.
Answer
2019-01-08 20:43
Carlos Görner
USB to Serial:
Using vscom usb to serial with driver for win 8. no driver for win 10 available. No PC changed also updated to ein 10. will this work also or have we to buy new vscom Boxes. Thank you for a quick answer.. Best Regards Carlos Görner
Answer